RSS

Category Archives: Uncategorized

Announcing Exchange Server 2016 Preview!

Microsoft has been released exchange server 2016 public preview to download. They have announced this in first time at ignite and presented some features as well.

 

Advertisements
 
Comments Off on Announcing Exchange Server 2016 Preview!

Posted by on July 22, 2015 in Uncategorized

 

Tags: , ,

Exchange Server 2013 Preview has arrived :) Exchange 2003 guys time to Migrate to Exchange 2010

 

BrandLogoExchange

Few days back new family member (Release Preview) of Microsoft Exchange has been arrived with fantastic architectural changes and new features. This is just a preview and some features may not be in RTM 😉 .

Some of Key changes in Exchange 2013 Release Preview

  1. Coexistence with Exchange 2007 and Exchange 2010 is supported and Exchange 2003 is not supported. So who is still dealing with Exchange 2003 now time to migrate to exchange 2010.
  2. Windows 2008 R2 Operating system and Windows 8 will support as a Operating System.
  3. Exchange 2013 preview use new Exchange Administration Center. That has a single unified Management console that allows to manage On-premises /online or Hybrid deployments. We cannot see Exchange management Console anymore and we don’t want to wait time to load management Console.
  4. Reduced number of server roles. So we won’t be able to see HUB Transport server role as a separate server role. We can see only Client Access Server Role and Mailbox Server role. But still we can use Exchange 2010 Edge Transport Server role for Exchange 2013. See Mail flow diagram – Figure 1
  5. RPC is not longer a required protocol for Exchange 2013. Exchange 2013 use RPC over HTTPS for Outlook Connectivity.
  6. Exchange 2013 has introduced Data loss prevention . So you can protect sensitive data by Transport rules.
  7. Exchange 2013 improved the auditing functionality so we can import and export the Administrator audit log and the audit log records whenever a mailbox accessed by someone.
  8. With a new design We cannot see the separate Public folder database. Public folder uses Existing DAG functionality for high availability purpose. Replication method also change to single-master replication model form Multi-master replication model.
  9. Site Mailbox is there , So user can search document and emails by one client. This can integrate with SharePoint Server.
  10. Outlook WebApp has restructure. The Outlook WebApp user interface is improved and optimized for tablets and smart phones. Also user collaboration has improved. Hence users can merge contacts with social network such as Linkedin .

 

 

clip_image001

Figure 1

Finally, You can download Preview bits and help files:

 

Bits: http://technet.microsoft.com/en-us/exchange/fp179701

CHM Help: http://www.microsoft.com/en-us/download/details.aspx?id=30338

 
Comments Off on Exchange Server 2013 Preview has arrived :) Exchange 2003 guys time to Migrate to Exchange 2010

Posted by on July 22, 2012 in Uncategorized

 

Tags:

Update Rollup 4 for Exchange Server 2010 (KB982639)

The Rollup 4 for Exchange Server 2010, Service Pack 1 has just been released today 22/06/2011.

Description

Update Rollup 4 for Exchange Server 2010 Service Pack 1 resolves issues that were found in Exchange Server 2010 Service Pack 1 since the software was released. This update rollup is highly recommended for all Exchange Server 2010 Service Pack 1 customers.

You can download it from below location.

Update Rollup 4 for Exchange Server 2010 Service Pack1
http://www.microsoft.com/download/en/details.aspx?id=26554
 
Comments Off on Update Rollup 4 for Exchange Server 2010 (KB982639)

Posted by on June 22, 2011 in Uncategorized

 

UDP Notification Support Re-added to Exchange 2010

Now this functionality will be back with in Exchange Server 2010 Service Pack 1 Roll-Up 3 (SP1 RU3) which will suppose to release on March 2011.

More info. Here

More information about Outlook 2003 with Exchange 2010. Here

 
Comments Off on UDP Notification Support Re-added to Exchange 2010

Posted by on January 29, 2011 in Uncategorized

 

Configuring Exchange 2010 Database Availability Groups

Exchange 2010 RTM has been released a few weeks back. Exchange 2010 came with some cool new features compared to previous versions and also some major differences in the field of High Availability. All High availability scenarios which came with previous Exchange server versions have been removed in this version.

Exchange server 2010 doesn’t have LCR, CCR or SCR high availability options, instead it has DAG (Database Availability Group) . You can achieve your high availability goal with DAG adding minimum 2 database copies and up to 16 database copies. DAG uses Continues replication technology that was first introduced with Exchange 2007 and DAG is essentially a combination of CCR and SCR that was available in Exchange 2007. You can find more information of DAG here.

Best practices of Database Availability Group

  1. Need to run two network adaptors on DAG nodes to support Windows Clustering.
  2. Be aware of choosing server hardware for DAG nodes. Because exchange DAG node should have the ability to manage load of replica of other master copies.
  3. Should be plan proper IP address schema for current and future requirements.
  4. Running NLB and DAG on same node isn’t support by Microsoft.
  5. Must disable Power Management setting on both BIOS and windows configurations.
  6. Test failover and failback before migrating users to DAG databases.
  7. Need to monitor DAG health periodically.
  8. Make Sure Database names are unique.
  9. Periodically move the master database among other DAG nodes to verify DAG is working properly.

In this article I’ll show you how to configure DAG using Exchange management Shell. Here I’ll use two DAG member servers, one  Hub transport, client access server and one domain controller.

Step 1 – Creating  new DAG

Create new database availability group using Exchange management shell. Run CMDlet  given below in the exchange management shell. This Cmdlet contains file share witness server name, DAG IP address for MAPI network and DAG name. (See figure 1)

New-DatabaseAvailabilityGroup -Name E14-DAG -WitnessServer EX10-CAHT -WitnessDirectory “c:\FSW” -DatabaseAvailabilityGroupIPAddresses 200.200.201.100 –Verbose

clip_image001

Figure 1 – Creating new DAG

Step 2 – Add first node to the DAG

At this point  DAG has been created, but DAG has no DAG members yet. So we should run cmdlet given below to add EX10-MB01 server to DAG. (See figure 2).

Add-DatabaseAvailabilityGroupServer -Identity E14-DAG -MailboxServer EX10-MB01 -Verbose

clip_image002

Figure 2 – Adding first node to the DAG.

Step 3 – Add second node to the DAG.

Add-DatabaseAvailabilityGroupServer -Identity E14-DAG -MailboxServer EX10-MB02 -Verbose

clip_image003

Figure 3 – Adding second node to the DAG.

Step 4 – Verify DAG through the Exchange Management Shell

Now we have finished creating DAG and adding members to that . Now we can see some new information via EMS made by the DAG.

Use Get-DatabaseAvailabilityGroup Cmdlet to verify DAG installation. Run this CMDlet in EMS. (See figure 4).

Get-DatabaseAvailabilityGroup -Identity E14-DAG –Status

clip_image004

Figure 4: Display operational Servers  

We can see E14-DAG has been added to the Exchange and EX10-MB01 and EX10-MB01 have been added to the DAG as members.

Run Get-DatabaseAvailabilityGroupNetwork Cmdlet to see available Network settings for the DAG. Run the CMdlet given below  in EMS. (See figure 5).

Get-DatabaseAvailabilityGroupNetwork -Identity E14-DAG

clip_image005

Figure 5: Display available Network Settings for the DAG.

At this point we have created the DAG.  Now we should add the Database copies to the DAG. Run CMDlet given below to replicate MB01 with EX10-MB02 and replicate MB02 with EX10-MB01 servers. See figure 6.

Add-MailboxDatabaseCopy -Identity MB01 -MailboxServer EX10-MB02

clip_image006

Figure 6: Adding MB01 database to EX10-MB02

Add-MailboxDatabaseCopy -Identity MB02 -MailboxServer EX10-MB01

clip_image007

Figure 7 : Adding MB02 database to EX10-MB01

At this point we have configured the DAG successfully. Now we should verify if whether  the DAG is configured or not . 

Run Get-MailboxDatabaseCopyStatus to monitor the overall health check of database copies. (See figure 8).

clip_image008

Figure 8: Check overall health status of the DAG

We can see information of database copies by running the below CMDLets. Run below CMDlet to see MB01’s Database copy information. See highlighted area. (See figure 9).

clip_image009

Figure 9: See MB01 database copy information.

Run Test-ReplicationHealth CMDlet to check replication status of DAG. (See figure 10).

clip_image010

Figure 10 : Test replication health of DAG.

In this article I have guided you in deploying Database Availability Group, Which is the coolest feature out of many in the new Exchange 2010. I’ll show you how to test failover scenarios in a future article.

 

Exchange 2010 RTM is on the way !

Today Microsoft Exchange Team blog has been announced Exchange 2010 code complete and it has been sent to early adopters of Microsoft to final look before its public release. According to their update suppose to launch at Tech-Europe 2009 in early November. Click here for full story.

 
Comments Off on Exchange 2010 RTM is on the way !

Posted by on October 9, 2009 in Uncategorized

 

Covering How to Backup Exchange 2007 Databases using Exchange 2007 SP2 New VSS plug-in

Introduction

There are many frustrated admins regarding backing up exchange 2007 on windows 2008 with windows server backup.Microsoft has been released VSS plug-in with exchange server 2007 SP2 as a solution for this problem.I will show you how to backup and restore to Original location and alternative location using VSS-plug-in in this multi part article. In the first article contain how to backup and restore to original location.

My lab contains 3 storage groups and those storage groups located in three disk sets. Please see below screens.

20

Storage Groups and Databases.

22

Volume List

Backing Up Exchange 2007 SP2 on Windows 2008 SP2

 

Installing Windows 2008 Backup Components

First you need to install Windows 2008 backup feature on Exchange 2007 SP2 installed server. You can use “ServerManagerCMD” or Server Manager MMC snap. It’s shown in figure1.

1

Figure1: Installing Backup features.

In next windows click Install and then click close to exit from the setup window.

Now Windows 2008 Backup feature has been installed and lets run it by Start > Administrative tools and selecting “Windows Server Backup” as shown in Figure 2.

2

Figure 2: Windows Server Backup

Select backup “Backup Once” in the Action Pane as shown in figure 3.and figure 4.

3

Figure 3

4

Figure 4: Selecting “Backup Once” in the Windows Server Backup Console

Then appears the “Backup Option” window, Click Next.Select Different options.See figure 5.

5

Figure 5: Backup Option

Then appears the “Select Backup Configuration” window. Select Custom because we don’t need to backup full system of the server as shown in figure 6.

6

Figure 6: Selecting Custom and click next

Now appears “Select backup items” window. Clear the “Enable system recovery” check box and select Volumes you want to backup. Then click Next as shown in figure 7.

7

Figure 7:Selecting Volumes

Now appears “Specify destination type” window. In here you can select either “Local drivers” or “Remote Shared Folder”. In this article I’ll use the local drivers. See figure 8.

select Dest

Figure 8:Specify destination type

Now appears “Select backup destination” window. Also You can see other information such as backup size, free space on the storage etc.Select different volume where not installed exchange databases As shown in figure 9.

8

Figure 9:Select backup destination

Now appears “Specify Advance option” window. Select VSS full backup option because it will truncate the logs after backup. If you chose VSS copy backup logs will not truncated. See figure 10.

9

Figure 10: Selecting Advance option

Now appears “Confirmation” page. On confirmation page can see summary of the backup job. Click on the Backup button in order to begin backup. See figure 11.

10

Figure 11: Confirmation Page

Now appears “Backup Progress” window. In this windows can see running consistency check for databases and creating a shadow copy of volumes. See figure 12 and figure 13.

12

Figure 12: creating a shadow copy of volumes

After consistency check has been completed backup operation will begin on each volume.see figure 13.

13

Figure 13: Backup in Progress.

After backup finished click on the Close button to exit as shown figure 14.

 

14

Figure14: Backup Completed

Now you can check the backed up files on the storage. You will notice all backup files saved as VHD file and associated with XML files. See figure 15.

17

Figure 15: Backup files saved as VHD files.

Check log files location to verify whether logs are truncated or not. In this article Logs are truncated successfully. See figure 16.

15

Figure 16: Logs has truncated in SG01.

Now you must check last full backup date on the MDB01 database. See figure 17.

16

Figure 17: Last full backup date.

 

Restore Databases to Original Location 

In the first part of this article we has discussed how to backup Exchange 2007 Sp2 on windows server 2008 using new VSS plug-in.now is time to consider how to restore the backup took using Windows server backup feature.

There are two options available to restore backup to exchange server. One is restore backup to original location and thereby overwrite the original database. Other option is restore database to alternative location.

Click Recover in the Action pane as shown in figure 18 and 19.

18

Figure 18

19

Figure 19

Then appears “Recover Wizard”. Please make sure to select “This server (Server Name")” and click next as show in figure 20

20

Figure 20:Selecting Server

Then appears “Select backup Date” screen. Select date you want to restore the data of exchange server. See figure 21

21

Figure 21: Selecting backup date

Then appears “Select Recovery Type” window. Select application as shown in figure 22.

22

Figure 22: Selecting Recovery Type

Then appears “Select Application” Window. Select Exchange as shown in figure 23.

23

Figure 23:select application

Click details button, then we can see storage groups that we have backed up. See figure 24

24

Figure 24: Details of Storage groups associate with this snapshot.

Click ok and click next.

Then appears “Specify recovery options” Window. Select “Recover to original location”. See figure 25.

25

Figure 25:Recovery Options

Then appears the “Confirmation” page. Click “Recover” to begin recovery process. See figure 26.

26

Figure 26: Recovery Confirmation page.

Then appears the “Recovery Progress” window. See figure 27.

27

Figure 27: Recovery Progress window.

After finish recovery operation you can click on the Close button. See figure 27.

29

Figure 27: Done the Restore operation successfully.

See restored database location. You will be see transaction logs restored. See figure 29.

19

Figure 29:Log files

In this article we covered how to backup and restore to original location using Exchange 2007 SP2 VSS plug-in feature. In the next article I’ll suppose to show you how to restore backup to alternative location.

 
Comments Off on Covering How to Backup Exchange 2007 Databases using Exchange 2007 SP2 New VSS plug-in

Posted by on August 27, 2009 in Uncategorized